Explore our top-tier fenestration hardware engineered specifically to pass stringent NFRC thermal metrics, California Title 24 Part 6 directives, and Canadian CSA A440 weatherability standards.
Since 2008, ArmorSafe Entry Door Systems Co., Ltd. has stood as a pioneer in high-security residential and commercial entry doors and architectural windows. Operating with 18 years of manufacturing background and 10 years of intensive export history, our engineering prowess is built upon strict international compliance metrics.
In modern architectural engineering, fenestration systems serve as critical environmental barriers that dictate building energy performance, structural integrity, and occupant comfort. For exporters and manufacturers targeting North America, compliance with the National Fenestration Rating Council (NFRC), California Title 24 Building Energy Efficiency Standards, and Canadian Standards Association (CSA A440) is not merely optional—it is a regulatory prerequisite for project sign-off and building permit issuance.
The NFRC provides objective, third-party energy performance ratings. Key parameters include U-Factor (measuring heat transfer rate, typically targeting 0.20–0.28 BTU/h·ft²·°F for cold regions), Solar Heat Gain Coefficient (SHGC) (quantifying solar radiation blockage, crucial for southern US climates), Visible Transmittance (VT), and Air Leakage (AL). ArmorSafe window profiles undergo rigorous LBNL THERM computer modeling and physical testing to ensure top-tier energy star ratings.
California’s Title 24 energy code mandates stringent Envelope Efficiency Provisions. Products exported to California must comply with mandatory maximum U-factor (prescriptive baseline ≤ 0.30) and SHGC (≤ 0.23 in cooling-dominated climate zones). Furthermore, advanced thermal breaks utilizing Technoform PA66 GF25 polyamide insulation strips are integrated directly into our extruded aluminum frames to completely eliminate conductive cold bridging.
Canadian installations require compliance with NBC (National Building Code of Canada) and Energy Star Canada zones (Zones 1 & 2). Fenestration must demonstrate superior ER (Energy Rating) calculations, incorporating low-emissivity (Low-E) coatings (such as Triple-Silver Solarban 70), warm-edge Argon gas insulation (90%+ fill rate), and exceptional structural resistance against severe sub-zero thermal contraction stresses.
In coastal markets such as Florida (Miami-Dade County NOA approval) and the Gulf Coast, energy efficiency must be paired with extreme structural impact resistance. ArmorSafe manufactures heavy-duty window and door systems tested to TAS 201 (Large Missile Impact), TAS 202 (Uniform Static Air Pressure), and TAS 203 (Cyclic Wind Pressure Loading). Utilizing laminated security glass (SentryGlas® / PVB interlayers from Kuraray), our hurricane sliding and casement series ensure zero penetration under design pressure ratings exceeding +80 / -80 PSF.
Our 22,000 sq ft production ecosystem leverages automated CNC double-head cutting saws, automated milling centers, and precision corner-crimping machinery to guarantee dimensional tolerances within ±0.5mm, vital for tight NFRC air leakage prevention.
Cutting
Punching
Gauze Installation
Cleaning Glass
Glass Installation
Gluing
Frame Connection
Testing
Packing
Cutting Machine
Milling Machine
Automatic Cutting Machine
Punching Machine
ArmorSafe maintains an uncompromising quality culture. Every production batch undergoes rigorous physical testing, verifying weather-tightness, wind pressure tolerances, and optical glass clarity prior to container loading.
Air Tightness Testing
Installation Testing
Water Tightness Testing
Wind Resistance Testing
Handle Tester
Glass Fogging Tester
Profile Thermal Insulation Conductivity Tester
Profile Cold Insulation Conductivity Tester
Drainage Display Device
Glass Optical Tester
Our dedicated R&D division introduced over 85 new product lines in the past year alone. Working closely with North American architects, structural engineers, and big-box distributors, we provide end-to-end customization—from custom extrusion dies and hardware cutouts to fully compliant structural calculation reports.
CAD Drawing Development
R&D Personnel Discuss
Handle Tester
Glass Fogging Tester
Profile Thermal Insulation Conductivity Tester
Profile Cold Insulation Conductivity Tester
Drainage Display Device
Review how ArmorSafe thermal break engineering compares against standard commercial non-thermal profiles and strict North American energy code minimums:
| Performance Metric | Standard Non-Thermal Aluminum | US Title 24 Baseline | ArmorSafe NFRC Thermal Break Series |
|---|---|---|---|
| U-Factor (BTU/h·ft²·°F) | 0.60 – 0.80 (Poor thermal resistance) | ≤ 0.30 Prescriptive | 0.18 – 0.24 (High Thermal Barrier) |
| SHGC (Solar Heat Gain) | 0.65 – 0.75 (High heat transmission) | ≤ 0.23 (Zone Dependent) | 0.16 – 0.22 (Low-E Double/Triple Glazed) |
| Air Leakage (CFM/ft²) | > 0.30 (Air infiltration prone) | ≤ 0.30 max limit | ≤ 0.04 (EDPM Multi-point Sealing) |
| Impact Resistance (HVHZ) | Non-rated (Standard Glass) | Regional (Florida / Coastal) | Miami-Dade NOA / TAS 201/202/203 (+80 PSF) |
| Thermal Barrier Material | None | Standard PVC / Pour & Debridge | Technoform PA66 GF25 Polyamide Struts |
| Acoustic Rating (STC) | 22 – 25 dB | 28 – 30 dB | 38 – 45 dB (Laminated Acoustic Core) |
Designed for compliance with California Energy Commission (CEC) Title 24 standards. Our ultra-narrow frame casements and large-format sliding doors maximize view lines while maintaining low SHGC to drastically reduce air conditioning loads in hot interior valleys.
High-velocity hurricane zones require extreme structural rigidity against severe atmospheric pressure differentials. ArmorSafe heavy-duty impact sliding doors combine NOA certified hurricane glazing with corrosion-resistant 316 stainless steel multi-point hardware systems.
For regions subject to severe winter freezing, our triple-glazed Low-E windows with warm-edge warm-conductive spacers ensure condensate-free interiors, preventing mold growth while significantly curtailing heating bills in Ontario, Quebec, and Northern US states.
As international carbon-neutral targets accelerate, ArmorSafe R&D is pushing the boundary of smart fenestration engineering through four core tech vectors:
Integrating nanoporous silica aerogel into internal aluminum profile chambers to lower overall frame U-factor down to hyper-efficient 0.12 BTU/h·ft²·°F thresholds.
Developing integrated dynamic glass systems that automatically adjust tint levels based on solar radiation angles and internal IoT room sensors for optimal solar control.
Transforming standard fixed glazing windows into clean power generation units via semi-transparent building-integrated photovoltaic (BIPV) solar glass modules.
U-Factor measures the rate of non-solar heat loss through an entire window assembly (frame, glass, and spacer), whereas R-value measures thermal resistance of individual materials. In the US, building codes specify U-Factor (lower numbers indicate superior performance). U-Factor is mathematically the inverse of R-Value (U = 1 / R).
Our fenestration lines undergo computer thermal simulation via NFRC-accredited labs using LBNL THERM & WINDOW software. Certified ratings are listed on official NFRC temporary labels affixed to every window unit exported to California, enabling quick job-site inspection approval by local building officials.
Yes. Our hurricane series features heavy-gauge 6063-T6 extruded aluminum profiles with continuous steel reinforcements, multi-point locking locks, and laminated impact glass tested under TAS 201/202/203 protocol, certified for Florida Building Code (FBC) compliance.
Standard manufacturing lead time is 25 to 35 days. Windows and doors are protected with protective film, foam edge guards, shrink wrap, and packed inside fully enclosed fumigated plywood crates to ensure zero transit damage during transpacific sea freight shipment.
Absolutley. We offer AAMA 2604 and AAMA 2605 compliant fluorocarbon (PVDF) powder coating finishes with up to 20-year color retention warranties against coastal salt spray and high UV radiation.
Browse the remainder of our NFRC, AS2047, and energy-efficient window and door catalog designed for residential, commercial, and hospitality projects worldwide.
ArmorSafe Doors